Welcome Xinghua Yugong Machinery Co., Ltd.!

  • MAIL US: yjd690@vip.sina.com
  • CALL US: +86-13852898298

How to install and test the vegetable dehydrator

2021-05-24 16:05 Hits:352

The use of vegetable dehydrator to pre-process vegetables is a common practice in vegetable deep processing. The dried vegetables have incomparable advantages over bulk vegetables in terms of storage time, number of colonies, and long-distance transportation. Huanxin brand vegetable dehydrator is mainly used for the dehydration and drying of vegetables and food after washing. It is energy-saving and efficient, and does not damage the vegetables. It is an essential equipment for vegetable deep processing.

   The vegetable dehydrator is relatively lighter and smaller in size, so in terms of design, the volume is larger, the barrel is higher, and the barrel is higher from the ground. In order to ensure that it will not be thrown out of the barrel during the high-speed drying process, the vegetable dehydrator is equipped with a lid.

    Next, I will introduce the installation and test machine of the vegetable dehydrator:

    1. Installation instructions:

    1. It must be installed on a flat and firm ground;

   2, please prepare drainage pipes and power supply before installation;

   3. Clean up the debris inside and outside the vegetable dehydrator;

   4. Move the vegetable dehydrator to the predetermined position, and place the shockproof rubber pad;

    5. Use fixing bolts or pull-out screws to fix the vegetable dehydrator;

    6. Connect the power supply and wait for the test machine.

    2. Test machine and use:

    1. Please test the machine before using the vegetable dehydrator, pay attention to the safety of the test machine;

   2. After the test machine is normal, shut down the equipment; 10 seconds after the power is cut off, the brake can be used to assist the shutdown;

   3. After the equipment is completely stopped, evenly place the vegetables to be dehydrated around the inner container of the vegetable dehydrator;

    4. Start the vegetable dehydrator for dehydration;

    After 5 or 2-3 minutes, there is basically no water flowing out of the water outlet, cut off the power supply, and shut down the vegetable dehydrator;

    6. Check whether the vegetables reach the expected dryness, and remove the dried vegetables out of the dehydration bin;

   7. Clean the vegetable dehydrator, and do the covering work after natural air drying.


Previous:How to maintain the vegetable washing machine reasonably? Next:Working principle of roller scraper dryer